Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the touch screen of the Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Onboard computer

Repairing the touch screen of the 2019 Jeep Compass is straightforward with our video tutorial that will guide you through the steps to do it yourself. The first step is to remove the onboard computer from the vehicle; remove the centre console and then unscrew the screws securing the screen. Before fully extracting the screen, disconnect the connector. The second step is to flip the screen over to unscrew the screws holding it in place and then remove the screen. The third step is to insert a new screen. The fourth step is to reassemble the screen onto the computer. The fifth step is to reinstall the onboard computer in the vehicle.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Temporarily Disable the Handbrake on a Jeep Compass to Replace the Brake Pads?
How to Temporarily Disable the Handbrake on a Jeep Compass to Replace the Brake Pads?
Jeep Compass (2016-2025 / 552, MK 2) This short tutorial shows how to temporarily disable the handbrake on a Jeep Compass to replace the rear brake pads. This procedure will put the car …
How to replace the display in a Jeep Compass?
How to replace the display in a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) In this tutorial, you will see how to replace the main display in a Jeep Compass, a very simple and quick operation. First, ensure that the key is no…
How to replace the display in the Jeep Compass?
How to replace the display in the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial we can see how to replace the display in the Jeep Compass, a very simple and quick operation. First of all, make sure that the key i…

    Frequently Asked Questions

    • Compass 2016-2025 - Why doesn't the Start&Stop of the Jeep Compass 2 work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos