Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse diagram for the Jeep Cherokee?

Model: Jeep Patriot MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

Video tutorial

In this video, you can see where the fuse boxes are located in the Jeep Cherokee and their respective diagrams, to consult if you need to check the fuses of a malfunctioning device. The first box is inside the cabin, specifically in the lower left area of the dashboard on the driver's side.

The second box is located in the engine compartment, protected by the black plastic cover behind the battery. Ensure you replace any blown fuses with spares of the same specifications and operate with the vehicle turned off.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

Location and diagram of the fuse boxes for the 2007 Jeep Patriot.
Location and diagram of the fuse boxes for the 2007 Jeep Patriot.
Jeep Patriot (2007-2017 / MK 1) In this video, we can see the location and diagram of the fuse box of the Jeep Patriot, which was built in a single version from 2007 to 2017. The fu…
Location and Diagram of the Fuse Boxes for the Jeep Patriot MK1
Location and Diagram of the Fuse Boxes for the Jeep Patriot MK1
Jeep Patriot (2007-2017 / MK 1) In this guide, we will look at the diagram of the fuse boxes for the Jeep Patriot MK1, while this section describes their location: one power module …
Where are the Fuses Located in the Jeep Patriot?
Where are the Fuses Located in the Jeep Patriot?
Jeep Patriot (2007-2017 / MK 1) If you need to check the fuses after a fault in one of the devices in the Jeep Patriot, you can refer to this video which shows the diagram and where…

Other guides you may be interested in

    Frequently Asked Questions

    • Patriot 2007-2017 - Where is the alternator fuse located on the Jeep Patriot? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos