Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Transmission Replacement and Maintenance

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Drivetrain

See other generations:
Video tutorial

A simple and quick operation that allows you to save time and money by avoiding leaving your vehicle at a garage for this work. Just follow this brief guide to understand how to perform the replacement entirely on your own. Release and lift the bonnet, then remove the upper engine cover.

Check the oil level in the sump using the dipstick with the yellow ring next to the engine. The level should be neither too high nor too low, as indicated in the video.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Change the Transmission Oil of a Jeep Wrangler
How to Change the Transmission Oil of a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this guide, learn how to change the oil in the transmission of a Jeep Wrangler. Position your vehicle on a column lift and raise it to a comfortab…
Replacement and Maintenance of Transmission Lubricant
Replacement and Maintenance of Transmission Lubricant
Jeep Wrangler (2007-2018 / JK, MK 3) First, lift your vehicle, preferably on a ramp; otherwise, suitable axle stands will suffice. Next, locate the transmission to unscrew the cap indica…
How to Change the Transmission Oil on a Jeep Wrangler
How to Change the Transmission Oil on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) In this video tutorial, you will learn how to remove and replace the transmission oil on a Jeep Wrangler by following the instructions below. First, …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos