Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the side indicator bulb of the Kia Carens MK3

Model: Kia Carens MK 3 - Years 2013-2019
Part: Light bulb

In this video we see how to change the front side indicator light of the Kia Carens MK3: fortunately on this vehicle it is possible to easily access the rear of the headlight unit, from the engine compartment. We have enough space for our hands, and we can easily unscrew the rubber cap on the back; we then remove the electrical connector, push down the safety spring that holds the lamp we are interested in place. We pull it back and then remove the burnt-out bulb. Now we go to put the new bulb back in place. The youtuber rightly wears disposable gloves, because the new bulb should not be touched with bare hands. We turn the lamp, close the safety and then close the rubber cap. Operation completed.

Posted on 7 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Bulbs on Kia Carens
Replacing Front Bulbs on Kia Carens
Kia Carens (2013-2019 / MK 3) The tutorial begins with the front headlamp already removed. For the indicator bulb, as clearly shown in the video, simply slightly unscrew the conne…
How to Replace the Headlamp Bulb on a Kia Carens
How to Replace the Headlamp Bulb on a Kia Carens
Kia Carens (2006-2013 / MK 2) Is the headlamp bulb blown? Here’s how to change the bulb on a Kia Carens. Open the bonnet by pulling the lever located at the bottom right of the da…
How to Replace the Front Headlamp Bulb on a Kia Carens
How to Replace the Front Headlamp Bulb on a Kia Carens
Kia Carens (2013-2019 / MK 3) Briefly see how to remove and replace the front headlamp bulb on a Kia Carens. First, open the bonnet of your car and start by removing the plastic c…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos