|
Do it yourself
| |||
| ||||
What is the correct tire pressure for the Kia Sportage?
Model: Kia Sportage
QL, MK 4
- Years:
2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
In this video we can see how to adjust the tire pressure on a Kia Sportage MK4: the correct pressure depends on the tire profile and the weight of the vehicle. On the driver's side door frame of the vehicle, there is a metal label that shows the recommended pressures by the Manufacturer (the same data can also be found in the owner's manual) for the front and rear tires, both with only the driver and fully loaded. The allowed tire sizes for that specific model are also listed. The pressures are shown in this case in PSI (pounds per square inch) and in Kpa (kilopascal). For vehicles in the European Union, the pressure in Bar is also shown. The pressure is also recommended for the spare tire. The pressure can be easily measured with a tire gauge, attaching it to the valve for reading. If the pressure is too low, we can inflate them with a compressor until the desired level; if it is too high, we can release some air by pressing on the valve stem with a small tool (a simple ballpoint pen can also be useful).
Posted on 1 March 2025 by ScegliAuto
Related tutorials
Kia Sportage
(2016-2022 /
QL, MK 4)
To reset the tyre pressure light on a Kia Sportage, inflate the tyres to the recommended pressure. For this car model, the recommended inflation pres…
Kia Sportage
(2016-2022 /
QL, MK 4)
This guide provides instructions to reset the tyre pressure on a Kia Sportage. You will bring all four tyres to the correct operating pressure to res…
Kia Sportage
(2016-2022 /
QL, MK 4)
On the instrument panel of the Kia Sportage, it will be possible to make the tire pressure warning light disappear simply by inflating the tires to t…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |