Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the radio of the 2014 Kia Sorento

Model: Kia Sorento MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Car stereo

See other generations:
Video tutorial

To successfully disassemble the factory radio inside the cabin of your 2014 Kia Sorento, you must follow the steps described in our new guide. First, enter the car and make sure it is turned off, then remove the plastic panel located in the lower area of the central dashboard and disconnect the electrical cable.

Once you have done that, also remove the entire central plastic cover and once again disconnect the electrical cable connected to it. Finally, unscrew all the screws holding the radio in place and remove it.


Posted on 13 April 2025 by ScegliAuto


Related tutorials

How to Reset the Radio in a Kia Sorento
How to Reset the Radio in a Kia Sorento
Kia Sorento (2009-2014 / MK 2) This guide shows how to perform a forced reset of the standard radio in a Kia Sorento, following the instructions below. First, get inside the vehicl…
How to reset the UVO radio of the Kia Sorento?
How to reset the UVO radio of the Kia Sorento?
Kia Sorento (2014-2020 / MK 3) To reset the UVO radio of the Kia Sorento, press and hold a small button located next to the knob on the left side of the radio. You may need a thin …
Remove the Radio from a Kia Sorento
Remove the Radio from a Kia Sorento
Kia Sorento (2002-2009 / MK 1) Do you want to remove the radio from your Kia Sorento but don't know how to proceed? Let's see how to remove the original stereo in this guide. Remov…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos