|
Do it yourself
| |||
| ||||
How to reset the TPMS light on the 2025 Kia Picanto
Model: Kia Picanto
JA, MK 3
- Years 2018-2026
Today we will explain how to reset the TPMS light in 5 steps on a 2025 Kia Picanto vehicle. The first step is to park the vehicle on a flat surface. The second step is to adjust the tire pressure following the manufacturer's instructions. The third step is to press the TPMS SET button, located on the driver's side dashboard, for about three seconds to start the reset process. The fourth step is to check that the light on the instrument panel turns off. The fifth step is to drive the vehicle for 200 m on a flat road to store the data update.
Posted on 27 October 2025 by ScegliAuto
Video tutorial
Related tutorials
Kia Picanto
(2018-2026 /
JA, MK 3)
Here are the steps to reset the tyre pressure warning light on the Kia Picanto; before resetting the TPMS sensors, ensure all four tyres are at the c…
Kia Picanto
(2018-2026 /
JA, MK 3)
The information provided in this guide will show us how to reset the tire pressure warning light on the Kia Picanto; before resetting the TPMS sensor…
Kia Picanto
(2011-2018 /
TA, MK 2)
If the orange tire pressure monitoring system (TPMS) light on the instrument panel of your second-generation Kia Picanto (2015 model year) illuminate…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
