Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Kia Ceed?

Model: Kia Cee D MK 3, CD - Years 2018-2024
Part: Service warning light

Let’s see how to reset the service light on the Kia Ceed, in the attached video the model produced in 2019 is shown. Assuming that all scheduled work has been completed, primarily the engine oil and oil filter change, as specified by the manufacturer, for the reset we need to: turn on the ignition, access the Settings list using the buttons on the right side of the steering wheel, select the Service option and finally hold down the Ok button. This will reset the displayed mileage and update it to the next due date.

Posted on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Kia Ceed
How to Reset the Service Light on a Kia Ceed
Kia Cee D (2018-2024 / MK 3, CD) This tutorial shows how to reset the infotainment light on the Kia Ceed with the Touch infotainment system. Turn on the ignition without starting the…
How do you reset the Service light in the Kia Ceed?
How do you reset the Service light in the Kia Ceed?
Kia Cee D (2012-2018 / JD, MK 2) Let's discover how to reset the Service light in the Kia Ceed. This light is a warning for the maintenance schedule and therefore plays a crucial rol…
How to reset the service light on the 2017 Kia Ceed
How to reset the service light on the 2017 Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) To correctly complete the manual reset of the service light on your second generation Kia Ceed (year 2017), you must carefully read the following pro…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos