Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure on a Kia Rio

Model: Kia Rio MK 4, SC, YB - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

In today's video, we will see how to reset the tyre pressure on a Kia Rio, a fourth-generation model produced from 2016 to 2023. Before performing this procedure, it is important to check the correct pressure of each tyre as indicated by the manufacturer, but now let's see how to proceed.

Start the vehicle, then press and hold the reset button located on the control panel to the left of the steering wheel as shown in the video.

Once done, you will see the tyre pressure warning light start to flash, so continue to hold the reset button until the light goes out to reset the pressure and complete the task.


Posted on 19 May 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on a Kia Rio?
How to reset the tyre pressure warning light on a Kia Rio?
Kia Rio (2016-2023 / MK 4, SC, YB) To reset the tyre pressure warning light on a Kia Rio, inflate the tyres to the recommended pressure value: these values are listed on the sticker at…
How to Reset the Tyre Pressure Light on the Kia Rio?
How to Reset the Tyre Pressure Light on the Kia Rio?
Kia Rio (2016-2023 / MK 4, SC, YB) To reset the tyre pressure light on the Kia Rio, first inflate the car tyres to the correct inflation pressure: this value is indicated on the sticke…
How to Reset the Tyre Warning Light on a Kia Rio
How to Reset the Tyre Warning Light on a Kia Rio
Kia Rio (2016-2023 / MK 4, SC, YB) To reset the tyre pressure and turn off the tyre warning light on a Kia Rio, switch on the ignition without starting the engine. In the video, the li…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos