Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to charge the battery of the Kia EV3

Model: Kia EV3 MK 1 - Years 2024-2026
Part: Checks and maintenance

The charging socket for the Kia EV3 is located at the front of the vehicle above the front right tyre. After pressing the release button for the flap, push the door to open it. AC charging is possible through the power socket; remove the lower cover and insert the charger. Press the release button on the door and wait for the charge to complete. Disconnect the charging connector when the green light next to the charging socket is illuminated. If the vehicle fails to charge, take it to a workshop to check the battery fuse and the charging socket connector.

Posted on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Activate the Intelligent Regeneration System on the Kia EV3
How to Activate the Intelligent Regeneration System on the Kia EV3
Kia EV3 (2024-2026 / MK 1) The intelligent regeneration system equipped in your Kia EV3 helps preserve battery life automatically while maximising its use in various circumstan…
How do you replace the cabin filter of the Kia EV3?
How do you replace the cabin filter of the Kia EV3?
Kia EV3 (2024-2026 / MK 1) It will be possible to completely replace the cabin filter of the Kia EV3 by opening the glove compartment located on the passenger side. Once the co…
How to Factory Reset the Kia EV3
How to Factory Reset the Kia EV3
Kia EV3 (2024-2026 / MK 1) If you own a Kia EV3 and want to learn how to factory reset the infotainment system, simply read the following and apply the various steps in the cor…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos