Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter in a Kia Niro

Model: Kia Niro MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Air filter

See other generations:
Video tutorial

To replace the engine air filter in a Kia Niro, open the bonnet and locate the air filter box, situated in the engine compartment and connected to the intake pipe. Unlock the retaining clips or loosen the screws of the cover, depending on the vehicle version, then lift it to access the filter element.

Remove the old filter and check that there is no dust, leaves, or other debris inside the housing, removing them with a clean cloth. Place the new filter in the housing, ensuring the correct orientation and that it fits snugly around the entire perimeter.

Close the filter box cover, secure it with the clips or tighten the previously loosened screws, and check that the intake duct is properly secured. Finally, start the engine to verify that the intake system is functioning correctly.


Posted on 30 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Kia Niro
How to Replace the Cabin Filter on a Kia Niro
Kia Niro (2016-2023 / MK 1) In this new mini guide for your first-generation Kia Niro (2016-2020), we will describe step by step all the necessary steps to quickly and safely re…
Where is the OBD port of the 2022 Kia Niro located?
Where is the OBD port of the 2022 Kia Niro located?
Kia Niro (2016-2023 / MK 1) If you own a first-generation Kia Niro (year 2022) and want to find out where the OBD port is located, you just need to carefully read the following …
What is the fuse diagram for the KIA Niro?
What is the fuse diagram for the KIA Niro?
Kia Niro (2016-2023 / MK 1) In this video, you can see where the fuse boxes are located for the KIA Niro and the corresponding diagrams to consult if you need to check the fuses…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos