Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light from a Kia Ceed

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Tail light

What should you do if the bulbs of the rear light on your car no longer work? Let's see in this video how to replace the damaged bulbs of the Kia Ceed. Open the boot lid, and using a screwdriver, unscrew (with a socket or screwdriver with insert) the securing nuts located at the side of the rear light. Once the light is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with identical ones in size and voltage. Refit the rear light and proceed in reverse order for the other components.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Light Bulb in a Kia Ceed
How to Replace the Number Plate Light Bulb in a Kia Ceed
Kia Cee D (2006-2012 / MK 1) How do you replace the number plate light bulb in a Kia Ceed? This video shows how to replace the damaged bulb. Open the boot lid, and remove the int…
How to Remove the Front Headlight of the Kia Ceed
How to Remove the Front Headlight of the Kia Ceed
Kia Cee D (2006-2012 / MK 1) Today's guide will show you the main steps on how to remove and replace the front headlight of the Kia Ceed, following the instructions below. First,…
How to Replace the Rear Light Bulb on a Kia Ceed
How to Replace the Rear Light Bulb on a Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) Let’s see how to replace the rear light bulb on a Kia Ceed. In the rear boot, there are small compartments that provide access to the rear lights. Op…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos