Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Kia Venga

Model: Kia Venga MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

Video tutorial

After securing the vehicle on a ramp or a stable surface, open the bonnet. Next, remove a plastic component located on the passenger side within the engine bay, just below the plastic trim under the windscreen (as shown in the video).

To do this, disengage the three clips of the component (indicated in the video with red arrows). Now, using an appropriate spanner, loosen the three bolts securing the battery in place, allowing you to remove the old battery and replace it with a new one. Reassemble everything by reversing the steps taken.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Kia Venga
How to Replace the Battery on a Kia Venga
Kia Venga (2010-2019 / MK 1) Open the bonnet of your Kia Venga. Move the battery cover aside. Next, unscrew and remove the screws securing the two terminals to the battery, then …
How to Replace the Battery of the Kia Venga?
How to Replace the Battery of the Kia Venga?
Kia Venga (2010-2019 / MK 1) To replace the battery of the Kia Venga, open the bonnet to access the components inside the engine bay: just below the windscreen, you will locate t…
How to Replace the Battery in a Kia Venga
Kia Venga (2010-2019 / MK 1) Before starting, open the front bonnet of your Kia Venga. Begin by unscrewing the bolts that secure the terminals to the two battery poles, then disc…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos