Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pads on Kia Sportage

Model: Kia Sportage MK 2, KM - Years 2004-2010
Part: Brake pads

Loosen the front wheel bolts, lift the front of the car with a jack, and remove the aforementioned bolts along with the wheels. Unscrew the two 14 mm bolts at the brake caliper (one at the top and one at the bottom of the caliper) while holding the 17 mm nut steady with another spanner. Once done, you can remove the brake caliper, making it easy to replace the pads at this point. The procedure is the same for both front wheels, and for reassembly, proceed in reverse order. This is a task within everyone's reach.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Handbrake on the Kia Sportage
How to Adjust the Handbrake on the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) In this brief and simple guide, you will find instructions to adjust the handbrake on the Kia Sportage. First, get inside the vehicle and remove the …
How to replace the front brake pads on a Kia Sportage?
How to replace the front brake pads on a Kia Sportage?
Kia Sportage (2016-2022 / QL, MK 4) To replace the front brake pads on a Kia Sportage, lift the vehicle using a jack or ramp so that the corresponding wheel is off the ground. This will…
Replacement of Front Brake Pads
Replacement of Front Brake Pads
Kia Sportage (2004-2010 / MK 2, KM) Unscrew the wheel nuts and lift the vehicle securely. Remove the bolts and take off the wheel. Using a screwdriver and hammer, push out the two clips…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos