Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Cee D
    4. : Reset service warning light on Kia Cee'd

Kia Cee D - Video tutorial

Model: Kia Cee D MK 1 - Years 2006-2012
Part: Checks and maintenance
Operation: Reset service warning light on Kia Cee'd

In today's video tutorial we will see how to reset the oil change routine maintenance service light on a Kia Cee'd first series, in simple steps. First, let's get inside the car and make sure we have all the doors closed; then we turn on the ignition and go to press the arrow key at the top of the steering wheel and press until we arrive at the maintenance item. At this point we press the enter key until the reset item is cleared; we just have to turn off the ignition and start the engine to check the reset of the warning light, as shown in the video!


Posted on 19 January 2024 by ScegliAuto



How to turn off the service light on Kia Cee D.
Kia Cee D (2018-2024 / MK 3, CD) In this video tutorial we can see how to turn off the service light on Kia Cee D. The first thing to do will be to change the engine oil and filters.
How to reset the service light on a 2010 Kia Cee'd?
Kia Cee D (2006-2012 / MK 1) The reset of the service light on the 2010 Kia Cee D is a very simple operation, easily done in a few simple steps. The first thing to do is to turn
How to reset the service light on the 2020 Kia Cee'd
Kia Cee D (2018-2024 / MK 3, CD) To reset the service light on a 2020 Kia Cee D vehicle, first turn on the vehicle's instrument panel and then press the SETUP button on the onboard c

Other guides that may interest you

    Frequently Asked Questions

    • Cee D 2018-2024 - How do you reset the tire pressure warning light on the Kia Ceed? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos