Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Brake Drum and Shoes

Model: Kia Rio DC, MK 1 - Years 2000-2005
Part: Brake drums and shoes

For this operation, you will need the following tools: socket wrench, screwdriver set, brake cleaner, and extractor rags. First operation: lift the vehicle and remove the wheel bolts and the wheel itself. Remove the hub protection cover and take off the nut, then dismantle the drum using the appropriate extractor. If it is stuck, use a hammer to loosen it. Use a wire brush to remove dirt and rust from the inside and outside of the drum. Unscrew the brake screws and remove all parts. Clean all brake components thoroughly from rust, mud, and deposits to prevent seizing. Refit the drum with the nut and close it with the cover.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the handbrake of the Kia Rio
How to adjust the handbrake of the Kia Rio
Kia Rio (2011-2017 / UB, MK 3) In this guide we will see the instructions that will allow us to adjust the handbrake of the Kia Rio. First of all, we get into the car and start by …
Replacement of the Timing Belt and Tensioner
Replacement of the Timing Belt and Tensioner
Kia Rio (2000-2005 / DC, MK 1) Replacing the timing belt is a very delicate operation, advisable only for experienced individuals. Obtain replacement belts, loosen the wheel nuts, …
Instructions for Replacing Auxiliary Belts
Instructions for Replacing Auxiliary Belts
Kia Rio (2005-2011 / DE, MK 2) The vehicle model in question is equipped with two auxiliary belts, one dedicated to the power steering pump and the other that drives the alternator…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos