Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Number Plate Bulb on a Kia Rio

Model: Kia Rio UB, MK 3 - Years 2011-2017
Part: License plate light

Want to change the bulb inside the number plate light on a Kia? Here’s how to remove the bulb from the light unit. Lift the boot, locate the number plate light and disconnect it to access the bulbs: lever out the plastic until it detaches from the boot. Once the light unit is detached from the bodywork, disconnect the electrical connector, and you will find the bulbs inside. Remove the damaged bulb and replace it with a new one (always of the same type and size). Reconnect the electrical connector and refit the light unit to the bodywork of the boot.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Light Bulb of a Kia Rio
How to Replace the Interior Light Bulb of a Kia Rio
Kia Rio (2016-2023 / YB, MK 4, SC) To replace the interior light bulb of a Kia Rio, use a screwdriver to pry off the light fitting that covers the bulb. Once the light fitting is remov…
How to Change Headlamp Bulbs on Kia Rio
How to Change Headlamp Bulbs on Kia Rio
Kia Rio (2017-2023 / ) Are the bulbs in the headlamp of your Kia Rio blown and need changing? Here's how to do it. Open the front bonnet by pulling the lever located at the…
How to Replace the Front Fog Light Bulb on a Kia Rio
How to Replace the Front Fog Light Bulb on a Kia Rio
Kia Rio (2016-2023 / YB, MK 4, SC) Today, we will discover the steps to remove and replace the front fog light bulb on a Kia Rio, located on the bumper. To access the fog light bulb, i…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos