Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wing of a Kia Sportage

Model: Kia Sportage SL, MK 3 - Years 2010-2016
Part: Front bumper

If you have damaged the wing of your Kia Sportage, this video will show you all the steps to take. The wing and bumper of your car are obviously the parts of the bodywork most exposed to accidental damage. For example, in parking situations or during driving if you hit stones or kerbs. To replace the wing, you need to remove the wheel arch liner and the wheel to access the screws. Next, remove all the screws that hold it to the bodywork, being very careful not to break the springs present. After repairing or purchasing a new wing (depending on the extent of the damage), reassemble everything. Following the video, and with a bit of skill, it will be quite simple.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the External Wing Mirror on the Kia Sportage
Removing and Replacing the External Wing Mirror on the Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Today we will see the procedure for removing and replacing the external wing mirror on the Kia Sportage, in simple steps. First, open the front door …
Replacing External Wing Mirror on Kia Sportage
Replacing External Wing Mirror on Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Today, you will learn how to remove and replace the external wing mirror of a Kia Sportage third series. First, open the front door and pry off the t…
Where to Find the Fuse Box of the New Kia Sportage Hybrid
Where to Find the Fuse Box of the New Kia Sportage Hybrid
Kia Sportage (2021-2026 / MK 5, NQ5) In this guide dedicated to the new Kia Sportage Hybrid, discover where the fuse box containing all the fuses for your new Kia Sportage Hybrid is loca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos