Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Time on the Kia Picanto

Model: Kia Picanto MK 3, JA - Years 2018-2026
Part: Clock

To manually change the time displayed on the dashboard of your Kia Picanto takes just a few seconds. It is, in fact, a very simple procedure that you can carry out independently if you follow the instructions described below. First, insert the key and turn on the instrument panel without starting the engine. Next, locate the button situated within the fuel gauge and turn it clockwise (to advance the minutes) or anti-clockwise (to go back the minutes). Press it once to switch to hours and repeat the same procedure. Finally, press it again to save the changes.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Temperature Display from Celsius to Fahrenheit on a Kia Picanto
How to Change the Temperature Display from Celsius to Fahrenheit on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) In this video, you will see how to change the temperature display from degrees Celsius to degrees Fahrenheit (and vice versa, of course) on the instr…
How to adjust the clock of the Kia Picanto
How to adjust the clock of the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Today we will illustrate the steps to be taken independently to set the time on a 2012 Kia vehicle. The steps to adjust the clock on the Kia Picanto …
How to set the time on the Kia Picanto
How to set the time on the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) .. In today's article, we will see how to change the time on the Kia Picanto 2nd series. To adjust the time, you must first start the instrument.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos