Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Rio
    4. : How to replace the sidelight bulbs in the KIA Rio?

Kia Rio - Video tutorial

Model: Kia Rio MK 4, SC, YB - Years 2016-2023
Part: Headlight bulb
Operation: How to replace the sidelight bulbs in the KIA Rio?

As we can see in this tutorial, replacing the sidelight bulbs in the KIA Rio is an extremely quick and easy operation. Before proceeding, make sure that the key is not inserted in order to operate safely. We start by opening the bonnet, then, as regards the left headlight, we move both the battery and the fuse box slightly inwards. Then unscrew the outermost cap on the back of the lighthouse, grab the bulb holder with a flat-tipped screwdriver and extract it from the housing. Finally, we insert the spare part, type 5W5, and reassemble everything following the reverse procedure.


Posted on 31 August 2022 by ScegliAuto



How to change the headlight bulbs on Kia Rio
Kia Rio (2017-2023 / ) Are the bulbs mounted in the headlight of the Kia Rio burned out and need to be changed? Let's see how they change. We open the front hood by pulling
How to change the headlight bulb on Kia Rio
Kia Rio (2011-2017 / MK 3, UB) We want to change the bulb from inside the headlight of a Kia Rio? Let's see how to disassemble the damaged bulb. We lift the front hood, find the in
How to replace light bulbs on Kia Rio
Kia Rio (2011-2017 / MK 3, UB) Replacing the bulbs on Kia Rio: open the bonnet by pulling the lever located at the bottom right of the dashboard, let's put it in safety. Once we ha

Other guides that may interest you

    Frequently Asked Questions

    • Rio 2011-2017 - How to replace the headlight bulb on a Kia Rio? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos