Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Rio
    4. : How to change the battery of the remote control of the key of the Kia Rio

Kia Rio - Video tutorial

Model: Kia Rio MK 3, UB - Years 2011-2017
Part: Battery
Operation: How to change the battery of the remote control of the key of the Kia Rio

Let's see today the steps necessary to remove and replace the battery of the remote control of the Kia Rio key. First we take our remote control in hand and start removing the physical key from inside it; then we use something thin and pointed, like a flat screwdriver, to open the remote control shells in two parts, as shown in the video. At this point we remove the old battery and replace it with the new one, of the right type (in this case a 3V CR 2032); insert it in the correct direction and reassemble the remote control, making sure that the buttons work correctly.


Posted on 6 November 2022 by ScegliAuto



How to replace the battery in the remote control of the Kia Rio?
Kia Rio (2017-2023 / ) In order to replace the battery of the Kia Rio remote control, lift the key located in the upper part of the device and press the appropriate button.
How to replace the battery and buttons of a Kia Rio remote control
Kia Rio (2011-2017 / MK 3, UB) In this video we see a very damaged Kia Rio remote control, but we see how to restore it by also changing the power battery; in the meantime, let's o
How do i replace the battery of the Kia Rio?
Kia Rio (2011-2017 / MK 3, UB) In order to replace the battery of the Kia Rio you have to go and open the hood so that you can have access to the components inside the engine compa

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos