Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery in a Kia Rio?

Model: Kia Rio UB, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

To replace the key fob battery in a Kia Rio, first, slide out the key located at the bottom of the device by pressing the appropriate button. Once the key is removed, use an object to pry open the fob. The battery inside can then be extracted and replaced with a new one. After replacing the battery, close the fob by reinserting the key. This will allow you to check that all the buttons on the fob function correctly.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to replace the battery in the Kia Rio remote control
How to replace the battery in the Kia Rio remote control
Kia Rio (2016-2023 / MK 4, SC, YB) Replacing the battery of the Kia Rio car remote is a simple and quick operation to be carried out independently. To replace the battery, we need to p…
How to program the remote control of the Kia RIO key
How to program the remote control of the Kia RIO key
Kia Rio (2005-2011 / MK 2, DE) Below we will see the steps on how to program the remote key for the Kia RIO. First, let's get inside the vehicle and make sure all the doors are clo…
How to Replace the Battery and Buttons of a Kia Rio Remote
How to Replace the Battery and Buttons of a Kia Rio Remote
Kia Rio (2011-2017 / UB, MK 3) In this video, we see a very worn Kia Rio remote, and how to restore it by changing the power battery; first, open it using the tip of a small screwd…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos