Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Windscreen Wiper Blade

Model: Kia Sorento MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Windshield wipers

See other generations:
Video tutorial

Replacing the rear windscreen wiper blade is a maintenance task that is often overlooked and considered secondary compared to the front wipers; while it may not be as critical, excessive wear of the rubber part can scratch the rear window. It is important to note that the rear wiper is not a standard blade, and you must purchase the specific model, which is often not readily available in the aftermarket.

Therefore, consider replacing just the rubber insert, or if you choose to replace the entire blade, simply rotate it 90 degrees to detach it and proceed in reverse for the installation of the new one.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Replacing the Wiper Blades on a Kia Sorento
Kia Sorento (2009-2014 / MK 2) Learn how to replace the front wiper blades on a Kia Sorento. Take the front wiper blade (to be replaced) in hand, gently pull the movable blade (wit…
Replacing Car Wipers
Replacing Car Wipers
Kia Sorento (2009-2014 / MK 2) The following guide shows how to replace the worn wipers on your car. Wipers are components of the car that require replacement over time, as they we…
Replacing Windscreen Wiper Blades
Replacing Windscreen Wiper Blades
Kia Sorento (2009-2014 / MK 2) Replacing the windscreen wiper blades is a maintenance task that can be easily done yourself; it is very important to choose a quality product, and t…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos