Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Car Wipers

Model: Kia Sorento MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Windshield wipers

See other generations:
Video tutorial

The following guide shows how to replace the worn wipers on your car. Wipers are components of the car that require replacement over time, as they wear out from use during rain and also when cleaning the windscreen or rear window. Wipers must always be in perfect condition, as their malfunction can compromise the driver's visibility.

You can purchase new ones at an auto parts store. After purchasing, proceed to replace the old wipers with the newly bought ones; lift the wiper arm positioned on the windscreen.

You will need to flip the wiper and notice a small lever that holds the arm to the shaft; once found, push it and then release it downwards. Once done, perform the same method to install the new blade, then do the same with the other wiper, completing the replacement.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to Replace the Wipers on the KIA Sorento?
How to Replace the Wipers on the KIA Sorento?
Kia Sorento (2002-2009 / MK 1) In this tutorial, you will see how to replace the wipers on the KIA Sorento, an extremely simple and quick operation. First, ensure that the wipers a…
Replacement of Rear Windscreen Wiper Blade
Replacement of Rear Windscreen Wiper Blade
Kia Sorento (2009-2014 / MK 2) Replacing the rear windscreen wiper blade is a maintenance task that is often overlooked and considered secondary compared to the front wipers; while…
How to Replace the Windscreen Washer Pump on a Kia Sorento
How to Replace the Windscreen Washer Pump on a Kia Sorento
Kia Sorento (2009-2014 / MK 2) This guide shows how to replace the washer pump on a Kia Sorento. First, ensure the windscreen wipers are functioning and that there is water in the …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos