Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Indicator on the Kia Carens

Model: Kia Carens MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

After replacing the engine oil and the corresponding filter as specified in the user and maintenance manual, you will need to reset the service indicator that has illuminated on the instrument panel. To do this, follow the instructions outlined below.

First, access the cabin and sit in the driver's seat. Turn on the ignition and press the button located at the bottom of the right side of the steering wheel, holding it for about 5 seconds.

Then release the button and press it again for just one second, at which point the service indicator will be reset.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a KIA Carens?
How to Reset the Service Light on a KIA Carens?
Kia Carens (2013-2019 / MK 3) In this tutorial, you will see how to reset the service light on a KIA Carens, a task that is extremely simple and quick, to be done only after compl…
How to Reset the Service Light on a KIA Carens?
How to Reset the Service Light on a KIA Carens?
Kia Carens (2013-2019 / MK 3) In this tutorial, you will see how to reset the service light on a KIA Carens, a very simple and quick operation to perform only after completing all…
How to Reset the Service Light on a Kia Carens
How to Reset the Service Light on a Kia Carens
Kia Carens (2013-2019 / MK 3) This brief guide provides instructions on how to reset the service light for the routine maintenance of the oil change on a Kia Carens. First, get in…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos