Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Niro
    4. : How do you change the battery of a Kia Niro remote control?

Kia Niro - Video tutorial

Model: Kia Niro MK 1 - Years 2016-2023
Part: Key
Operation: How do you change the battery of a Kia Niro remote control?

We can see in this short tutorial how to replace the battery of the remote control of a first-generation Kia Niro. The first step is to press the release button of the metal key to remove it from its slot. Now, we pry inside the slot of the metal key to remove the back cover of the remote control, and once we have done that, we will immediately find the old battery in front of us that needs to be replaced. So, let's remove it and replace it with a new one, and then close the remote control by following the reverse procedure. The required battery is the CR2032 3v.


Posted on 10 July 2023 by ScegliAuto



How to replace the battery in the remote control of the Kia Niro?
Kia Niro (2016-2023 / MK 1) In order to replace the battery of the Kia Niro remote control, you must hold down the side button of the remote control and remove the key from the
How to open the key fob remote of the Kia Niro
Kia Niro (2016-2023 / MK 1) The steps shown in this guide will show us the process of disassembling and opening the shell of the Kia Niro key, as well as other models of the man
How to open the locked trunk hatch in the KIA Niro?
Kia Niro (2016-2023 / MK 1) In the KIA Niro, it may happen that the trunk hatch gets stuck, for example due to a problem with the control button or the lock actuator. In these c

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos