Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Kia Sportage

Model: Kia Sportage MK 3, SL - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Engine oil

See other generations:
Video tutorial

First, open and lift the bonnet. Then prepare an oil catch container to collect the oil when you unscrew the plug from the oil sump located at the bottom of the engine.

All the used oil will flow out, allowing you to change the filter. Remove the plug from the lower engine cover and unscrew the filter, preparing a collector to catch the oil that will spill out. Now, install the new filter and replace the plug on the oil sump.

Pour the new oil into the correct reservoir and you're done.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter of the Kia Sportage 2.4L
How to replace the engine oil and oil filter of the Kia Sportage 2.4L
Kia Sportage (2016-2022 / QL, MK 4) The following steps will show us how to perform the routine maintenance of changing the engine oil and oil filter on the Kia Sportage 2.4L. First, we…
Replacement of the engine oil and oil filter of the Kia Sportage 2.0 CRDI.
Replacement of the engine oil and oil filter of the Kia Sportage 2.0 CRDI.
Kia Sportage (2016-2022 / QL, MK 4) In this guide, we will see the steps that will allow us to perform the ordinary maintenance check, replacing the engine oil and oil filter, of the Ki…
How to Replace the Engine Oil and Oil Filter on a Kia Sportage 2.0 CRDI
Kia Sportage (2010-2016 / MK 3, SL) Learn how to carry out the procedure and routine maintenance service by replacing the engine oil and oil filter on the Kia Sportage 2.0 CRDI. First, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos