Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Kia Sportage 2.4L

Model: Kia Sportage QL, MK 4 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Oil filter

See other generations:
Video tutorial

The following steps will show us how to perform the routine maintenance of changing the engine oil and oil filter on the Kia Sportage 2.4L. First, we lift the vehicle and start by unscrewing the oil drain plug found on the oil pan, letting it drain into a container for about ten minutes; then we remove the small plastic cover and unscrew the oil filter cartridge with the appropriate wrench, as shown in the video.

At this point, we screw on and gently tighten the new oil filter by hand, finally topping up with the new engine oil.


Posted on 21 September 2025 by ScegliAuto


Related tutorials

Replacement of the engine oil and oil filter of the Kia Sportage 2.0 CRDI.
Replacement of the engine oil and oil filter of the Kia Sportage 2.0 CRDI.
Kia Sportage (2016-2022 / QL, MK 4) In this guide, we will see the steps that will allow us to perform the ordinary maintenance check, replacing the engine oil and oil filter, of the Ki…
How to Replace the Engine Oil and Oil Filter on a Kia Sportage 2.0 CRDI
Kia Sportage (2010-2016 / MK 3, SL) Learn how to carry out the procedure and routine maintenance service by replacing the engine oil and oil filter on the Kia Sportage 2.0 CRDI. First, …
How to Change Oil and Filter on a Kia Sportage
How to Change Oil and Filter on a Kia Sportage
Kia Sportage (2010-2016 / MK 3, SL) Here’s how to change the oil and filters for a Kia Sportage. You can find an oil change kit, for example, on eBay for £104.49 including delivery, whi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos