Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : How to deactivate the Kia Picanto airbag

Kia Picanto - Video tutorial

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Airbags
Operation: How to deactivate the Kia Picanto airbag

As a first step, unhook and lift the hood because working with the airbag requires the necessary precautions, then remove the cables connected to the battery connectors. Rotate the steering wheel in such a way as to have free space behind it, in fact the first screws to be removed are located right on the panel that is behind it, then proceed to unscrew them and in this way you will have released the central part of the steering, using the right game you can remove it and disconnect the pins on the back, after which you can reinsert this part for reassembly by following the steps in reverse.


Posted on 24 September 2023 by ScegliAuto



How do you deactivate the alarm of the Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) To deactivate the alarm of the Kia Picanto, you need to go inside the car and insert the ignition key into the corresponding slot: once the key is in
Where is the OBD2 port located in the Kia Picanto 2?
Kia Picanto (2011-2018 / TA, MK 2) If you are curious to know where the OBD2 port is located on your second-generation Kia Picanto (year 2011-2018), then you just need to pay attention
How to reset the TPMS light of the 2015 Kia Picanto.
Kia Picanto (2011-2018 / TA, MK 2) If the orange tire pressure monitoring system (TPMS) light on the instrument panel of your second-generation Kia Picanto (2015 model year) illuminate

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos