Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on a Kia Carens

Model: Kia Carens MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

Today, I will explain how to independently reset the TPMS light on a Kia Carens. The first step when you want to reset the light is to adjust the tyre pressures; to do this, follow the instructions in the vehicle's manual or on the stickers located on the driver's side door.

Once the tyre pressures are adjusted, you can proceed to reset the light. To reset, you need to: - turn on the ignition; - press the TPMS reset button located on the dashboard; once finished, turn off and then turn on the ignition again.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Kia Carens
Resetting the Service Light on the Kia Carens
Kia Carens (2013-2019 / MK 3) In this brief and simple guide, you will see how to reset the service light on the Kia Carens, following the instructions below. First, get inside th…
What Does the TPMS Light Indicate on a 2023 Kia Carens?
What Does the TPMS Light Indicate on a 2023 Kia Carens?
Kia Carens (2022-2026 / MK 4) When the TPMS light comes on in a vehicle, it means you need to check the tyre pressure as the sensor has detected a loss of pressure. To check the t…
How to Reset the Service Light on Kia Carens
How to Reset the Service Light on Kia Carens
Kia Carens (2013-2019 / MK 3) In this video tutorial, you can see how to reset the oil light on the Kia Carens. The first thing to do when this light comes on is to change the eng…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos