Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Lada Kalina

Model: Lada Kalina MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

If you need to replace the front brake pads on your vehicle, follow the instructions in this description and check out the video as well. The first thing to do is lift the vehicle and remove the wheel.

Use a pair of wrenches to loosen and remove the bolts securing the brake calipers. Then, pry to loosen and widen the calipers so you can lift the pads out. Next, take the new set of pads and position them in their place.

After that, reinstall the caliper bolts and reassemble everything.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Lada Kalina
How to Replace the Headlight Bulb on a Lada Kalina
Lada Kalina (2004-2013 / MK 1) To replace the headlight bulb on a Lada Kalina, open the hood to access the components in the engine compartment. Locate the protective cover of the …
How to replace the windshield wiper motor on the Lada Kalina?
How to replace the windshield wiper motor on the Lada Kalina?
Lada Kalina (2004-2013 / MK 1) To replace the windshield wiper motor on the Lada Kalina, lift the hood to access the plastic panel at the base of the windshield. The wiper motor is…
How to Replace the Headlight Bulb of the Lada Kalina?
How to Replace the Headlight Bulb of the Lada Kalina?
Lada Kalina (2013-2018 / MK 2) To replace the headlight bulb of the Lada Kalina, open the hood to access the back of the corresponding headlight. You will find a circular plastic c…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos