Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlamp on Lancia Voyager

Model: Lancia Voyager MK 1 - Years 2011-2014
Part: Headlight

Replace the front headlamp if damaged with a new one. Here’s how to remove it from the front. Open the engine bay bonnet. Remove the front bumper. Use a socket spanner to undo the securing screws located above the headlamp plastics. Disconnect the front headlamp from its housing once all screws are removed (disconnect the power connectors). Connect the power connectors and refit the headlamp with the associated screws. Test the correct operation of the previously installed bulbs by operating the control levers. Finally, refit the bumper.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Lancia Voyager?
Where are the fuses located in the Lancia Voyager?
Lancia Voyager (2011-2014 / MK 1) The fuses of the Lancia Voyager are contained inside the appropriate fuse boxes that are present on the vehicle: in this type of vehicle it will be p…
Reset the Service Light on the Lancia Voyager
Reset the Service Light on the Lancia Voyager
Lancia Voyager (2011-2014 / MK 1) Today, in this video tutorial, you will learn how to reset the service light for the routine maintenance oil change on the Lancia Voyager. First, get…
How to Reset the Service Light on the Lancia Voyager
How to Reset the Service Light on the Lancia Voyager
Lancia Voyager (2011-2014 / MK 1) To reset the service light on this vehicle, follow these steps: open the door and access the driver's seat, insert the ignition key and turn on the i…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos