Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator Fluid on a Lancia Delta

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Checks and maintenance

Replacing the radiator fluid on a Lancia Delta? Lift the car to access the drain plug for the radiator fluid. Open the radiator hose and drain the rusty fluid into a container. Flush the cooling system with a suitable fluid, performing this procedure until the pipes and radiator are completely clean. Reconnect the previously removed hose and tighten the metal clamp bolts in the engine bay. Refill the reservoir with new coolant. Test the car's operation.

Updated on 22 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where is the fuse box of the Lancia Delta 3 located?
Where is the fuse box of the Lancia Delta 3 located?
Lancia Delta (2008-2014 / MK 3) In this new mini guide we will discover where the box containing all the various fuses inside your Lancia Delta Mk3 is located. First of all, the veh…
Where is the Fuse Box on the Lancia Delta 3?
Where is the Fuse Box on the Lancia Delta 3?
Lancia Delta (2008-2014 / MK 3) If you own a third-generation Lancia Delta (2008-2014) and want to find out where the fuse box is located, simply read the following instructions car…
How to Replace the Automatic Gearbox Oil in the Lancia Delta 1.6 Multijet?
How to Replace the Automatic Gearbox Oil in the Lancia Delta 1.6 Multijet?
Lancia Delta (2008-2014 / MK 3) To replace the gearbox oil in the Lancia Delta, access the underside of the car and locate the drain plug of the gearbox. Open this plug and position…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos