Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a 2 DIN Stereo in the Lancia Musa

Model: Lancia Musa MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Car stereo

Video tutorial

This video shows the main steps to remove the original radio and install a new 2 DIN stereo in the Lancia Musa, as well as in the Ypsilon and Delta. First, get inside the vehicle and start by removing the original radio; to do this, lever the sides of the plastics to unscrew the radio screws, then disconnect the electrical connectors.

At this point, install the new radio, making the necessary modifications regarding the wiring; finally, fit the new plastic trim to finish the job, as illustrated in the video!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Install an MP3 Cable on the Lancia Musa
How to Install an MP3 Cable on the Lancia Musa
Lancia Musa (2004-2012 / MK 1) Learn how to install an MP3 cable on the Lancia Musa. First, extract the radio using the "U" keys, then install the USB cable terminals at the top of…
Removing the Logo from Lancia Musa
Removing the Logo from Lancia Musa
Lancia Musa (2004-2012 / MK 1) Removing the manufacturer's logo from the Lancia Musa? Here’s how to detach it from the front bonnet. Use a heat gun to warm up the old logo (as show…
How to Remove the Cabin Air Filter from a Lancia Musa
How to Remove the Cabin Air Filter from a Lancia Musa
Lancia Musa (2004-2012 / MK 1) Before you can start, sit in the front passenger seat of your Lancia Musa. Begin by removing the glove compartment by unscrewing the relevant fixing …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos