Do it yourself
| ||||
|
Lancia Ypsilon - Video tutorial
Model: Lancia Ypsilon
Y3, 846, MK 3, Ypsilon 3
- Years 2011-2023 In order to turn off the passenger airbag warning light on a Lancia Ypsilon on the instrument panel, we start by turning on the car, but it can also be done with only the instrument panel on, using the buttons on the top panel of the car radio, press the button "set" and the wording "reset tires" appears on the display, press the arrow down (next button to the right) until the wording "passenger bag" appears, press the "set" button, the wording "bag pass" appears : off" with the writing off flashing, press the arrow down (next key to the right) until the writing "on" appears instead of "off", press the "set" key, the writing "confirm" appears : no", press the arrow down (next button to the right) until the wording "yes" appears instead of "no", press the "set" button and the wording "passenger bag inserted" appears. Finally we can go back to the main menu by holding down the "set" button until the main screen appears and the airbag light is off. To deactivate the airbag, the message "bag pass: off" must appear on the display; if this message is present, we can return to the main menu, while if the message "passenger bag: on" is displayed, do the opposite of that. described to activate it. Now we can turn off the car and the instrument cluster.
Posted on 3 December 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.077
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |