Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Connect an MP3 Cable in the Lancia Musa

Model: Lancia Musa MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Car stereo

Video tutorial

In the following video, you will see how to connect an AUX MP3 cable to the Lancia Musa's car radio. You will need an AUX cable and radio removal tools.

First, turn on the ignition. Then, press the CD button twice in the centre of the dashboard where the car radio is located.

If the display shows "Aux", the car is equipped for this connection, and you can proceed. Insert the radio removal tools into the designated holes and pull until the unit comes out. At this point, connect the AUX cable to the back of the car radio.

As shown in the video, drill a small hole in the upper part of the dashboard on the driver's side to pass the other end of the cable through. Now, reposition the car radio and connect the AUX cable to the desired device.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

How to Install an MP3 Cable on the Lancia Musa
How to Install an MP3 Cable on the Lancia Musa
Lancia Musa (2004-2012 / MK 1) Learn how to install an MP3 cable on the Lancia Musa. First, extract the radio using the "U" keys, then install the USB cable terminals at the top of…
How to Remove the Cabin Air Filter from a Lancia Musa
How to Remove the Cabin Air Filter from a Lancia Musa
Lancia Musa (2004-2012 / MK 1) Before you can start, sit in the front passenger seat of your Lancia Musa. Begin by removing the glove compartment by unscrewing the relevant fixing …
How to Remove the Armrest of a Lancia Musa Seat
How to Remove the Armrest of a Lancia Musa Seat
Lancia Musa (2004-2012 / MK 1) Before starting, enter your Lancia Musa. Begin by removing the knob that adjusts the seat tilt. Next, insert the tip of a medium-sized flathead screw…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos