Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to remove the Lancia Ypsilon gearshift gaiter

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon MK 2, 843, Ypsilon 2, Y2 - Years 2003-2011
Part: Gearshift gaiter
Operation: How to remove the Lancia Ypsilon gearshift gaiter

If your cap is already damaged or in any case broken and not recoverable, you will have to unhook the buttons at the top to be able to overturn the cap and by removing the last button on the neck you can completely remove the cap, also remove the ring nut at the base, in this way you can proceed with the replacement of the various pieces removed, if it is not present on the new cap to be installed, you will have to extract the counter ring at the base of the leather cap. Now you just have to go and reassemble everything with the new pieces, retracing the steps backwards for reassembling the various components.


Posted on 25 September 2023 by ScegliAuto



How to replace the Lancia Ypsilon gearshift gaiter
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) To carry out this simple operation you will need a few tools and a few minutes of your time, in fact you can start the operations by releasing the bu
Disassembly of the gear knob on the Lancia Ypsilon 2
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa,
How to replace the Lancia Ypsilon gearshift gaiter
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) The gearbox protection is damaged or in any case broken and not recoverable, you just need to unbutton the buttons at the top to be able to overturn

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos