Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Gaiter on the Lancia Ypsilon

Model: Lancia Ypsilon Y2, MK 2, 843, Ypsilon 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Shifter boot

See other generations:
Video tutorial

If the gear gaiter is damaged or broken and cannot be repaired, simply unbutton the buttons at the top to flip the gaiter over. After removing the last button on the collar, you can completely take off the gaiter.

Also, remove the ring at the base. Now you can proceed to replace the various removed parts.

If it is not present on the new gaiter to be installed, you will need to extract the counter ring located at the base of the leather gaiter. Now all that’s left is to reassemble everything with the new parts by retracing the steps in reverse for reassembly.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

Removing the Gear Knob on a Lancia Ypsilon 2
Removing the Gear Knob on a Lancia Ypsilon 2
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Today, in this video tutorial, you will see how to remove and replace the gear knob on a second series Lancia Ypsilon, as well as on a Lancia Musa, i…
How to Replace the Gear Knob Gaiter on a Lancia Ypsilon
How to Replace the Gear Knob Gaiter on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) To carry out this simple operation, you will need a few tools and a few minutes of your time. Start by disconnecting the button that secures the top …
How to install the gear shift knob on a Lancia Ypsilon version 843
How to install the gear shift knob on a Lancia Ypsilon version 843
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) In this video we can see how to mount the new gear lever gaiter on a Lancia Ypsilon version 843: the gaiter, especially if it is made of faux leather…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos