Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external rearview mirror of the Land Rover Discovery

Model: Land Rover Discovery MK 4, LR4, Discovery 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

See other generations:
Video tutorial

The instructions in this guide will show us how to disassemble and replace the external rearview mirror of the Land Rover Discovery. First, we open the front door of the vehicle and start removing the triangular plastic cover located behind the mirror; then we disconnect the electrical connector for the glass adjustment and unscrew all the fixing screws of the mirror, removing it from the outside, as shown in the video.

At this point, we install the new external rearview mirror, fixing it properly and finally reassemble the plastic cover!


Posted on 5 February 2025 by ScegliAuto


Related tutorials

Where to Find the OBD Port of the 2016 Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) Finding the OBD port in your 2016 Land Rover Discovery is very simple, and with the following guide, it will literally take you just a few seconds. F…
How to replace the battery in the Land Rover Discovery key
How to replace the battery in the Land Rover Discovery key
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) In this new guide of ours, we will explain how you can replace the battery inside the key of your Land Rover Discovery. First of all, remove the phys…
Removing Speaker from Land Rover Discovery 2
Removing Speaker from Land Rover Discovery 2
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) In this video tutorial, you will learn how to remove the front speaker from a Land Rover Discovery 2. First, open the front door and detach the door …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos