Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the external rearview mirror of the Land Rover Freelander

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

See other generations:
Video tutorial

Following these simple steps, we will see how to disassemble and remove the external rearview mirror of the Land Rover Freelander. First, we open the front door of the vehicle and start by removing the triangular plastic cover located behind the mirror; then we remove the door panel and the gasket, as shown in the video.

At this point, we unscrew the three fixing nuts of the mirror, removing it from the outside (disconnecting the electrical connector); then we replace the mirror with the new one, finally adjusting the glass angle!


Posted on 5 February 2025 by ScegliAuto


Related tutorials

How to Remove the Air Vents in a Land Rover Freelander 2
How to Remove the Air Vents in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video tutorial shows how to remove the air vents in a Land Rover Freelander 2. First, remove and extract the plastic panels located at the sides…
How to Remove the Auxiliary Belt on a Land Rover Freelander
How to Remove the Auxiliary Belt on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before you begin, open the front bonnet of your Land Rover Freelander. Start by unclipping and removing the auxiliary belt cover. This will also expo…
How to Remove the Door Panel on a Land Rover Freelander
How to Remove the Door Panel on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Removing the front door panel on this model is very straightforward, but there are some precautions to observe; before starting the removal of the pa…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos