Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up the AdBlue on the Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

Shortly, we will see the instructions that will allow us to top up the AdBlue fluid on the Land Rover Evoque. First, we open the hood of the car and start to locate the cap of the tank reservoir that we find on the top part of the engine compartment; then we unscrew the cap and top up using the appropriate container, filling up to reach the maximum level mark, as shown in the video.

At this point, we screw on the cap and close the hood, turning on the instrument panel to check the new level of AdBlue present.


Posted on 27 October 2025 by ScegliAuto


Related tutorials

How to Top Up AdBlue on a Range Rover Evoque MK1
How to Top Up AdBlue on a Range Rover Evoque MK1
Land Rover Evoque (2011-2018 / L538, MK 1) In this video, you will learn how to top up AdBlue on a Land Rover Evoque MK1. First, identify where the filler neck for the additive is located. It …
How to Check the AdBlue Fluid Level in the Land Rover Evoque?
How to Check the AdBlue Fluid Level in the Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) In this tutorial, you will learn how to check the AdBlue fluid level in the Land Rover Evoque, a very simple and quick operation. First, enter the ca…
How to Reset the Low Range Warning Light Due to Low AdBlue Level on the Range Rover Evoque
How to Reset the Low Range Warning Light Due to Low AdBlue Level on the Range Rover Evoque
Land Rover Evoque (2018-2026 / MK 2, L551) In modern diesel engines, to meet environmental standards for reducing emissions, the AdBlue additive has been added. If the AdBlue level drops below…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos