Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up AdBlue on a Range Rover Evoque MK1

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: AdBlue warning light

In this video, you will learn how to top up AdBlue on a Land Rover Evoque MK1. First, identify where the filler neck for the additive is located. It is found under the hood, just below the grille beneath the windshield. There, you will find the AdBlue filler neck, which you should protect with a cloth to keep it clean. It is also a good idea to use a funnel, even though the container has a built-in spout designed to prevent spills. Typically, containers are 4 gallons. It is recommended to keep the tank as full as possible to avoid crystallization.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Low Range Warning Light Due to Low AdBlue Level on the Range Rover Evoque
How to Reset the Low Range Warning Light Due to Low AdBlue Level on the Range Rover Evoque
Land Rover Evoque (2018-2026 / L551, MK 2) In modern diesel engines, to meet environmental standards for reducing emissions, the AdBlue additive has been added. If the AdBlue level drops below…
How to Reset the AdBlue Warning in a Range Rover Evoque
How to Reset the AdBlue Warning in a Range Rover Evoque
Land Rover Evoque (2018-2026 / L551, MK 2) In today's video, you will see how to reset the AdBlue warning in a Range Rover Evoque. Unlike the expired service warning, the AdBlue warning usuall…
How to top up the AdBlue on the Land Rover Evoque
How to top up the AdBlue on the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Shortly, we will see the instructions that will allow us to top up the AdBlue fluid on the Land Rover Evoque. First, we open the hood of the car and …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos