Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Refill AdBlue in a Range Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: AdBlue warning light

In this video, we will show you how to refill AdBlue in a Range Rover Evoque. Open the hood and locate the AdBlue fill neck at the back of the engine. Ensure that the AdBlue is of good quality and compatible with your vehicle's engine. The fill neck position is not very convenient, so you will need an extension to refill the fluid. Open the cap of the reservoir inside the engine by turning it counterclockwise. Now, screw the plastic extension onto the fluid jug and start pouring the fluid into the reservoir. Once finished, do not forget to screw the cap back onto the fill neck by turning it clockwise.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Low Range Warning Light Due to Low AdBlue Level on the Range Rover Evoque
How to Reset the Low Range Warning Light Due to Low AdBlue Level on the Range Rover Evoque
Land Rover Evoque (2018-2026 / L551, MK 2) In modern diesel engines, to meet environmental standards for reducing emissions, the AdBlue additive has been added. If the AdBlue level drops below…
How to Reset the AdBlue Warning in a Range Rover Evoque
How to Reset the AdBlue Warning in a Range Rover Evoque
Land Rover Evoque (2018-2026 / L551, MK 2) In today's video, you will see how to reset the AdBlue warning in a Range Rover Evoque. Unlike the expired service warning, the AdBlue warning usuall…
How to Replace the Automatic Transmission Fluid in a Range Rover Evoque
How to Replace the Automatic Transmission Fluid in a Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Let's go through the steps necessary to replace the transmission fluid in the Range Rover Evoque. First, lift the vehicle and locate the transmission…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos