Do it yourself
| ||||
|
Land Rover Discovery - Video tutorial
Model: Land Rover Discovery
L318, Discovery 2, MK 2
- Years 1998-2004 In this video tutorial we will see the main steps to be able to remove the passenger compartment fan of a Land Rover Discovery. To do this we have to go and disassemble everything in the dashboard instrumentation including the part of the steering wheel where we are going to disconnect the connectors. Then we will remove the steering wheel and remove the entire part of the dashboard: at this point we will access the stove together with the fan. If we want to replace the fan we must pay attention to the type of connector and replace it with a compatible one (unless it is proposed to mount a different one by opting for a modification). Follow the video step by step for further explanations.
Posted on 13 December 2023 by ScegliAuto
This video is currently unavailable
How to remove the radiator fan of a Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Before we can begin, we will have to go and open the front hood of our Land Rover Discovery. So let's start by unscrewing and removing the four screw
How do you replace the Land Rover Discovery cabin fan?
Land Rover Discovery (2004-2010 / Discovery 3, L319, MK 3, LR3) In order to replace the passenger compartment fan on the Land Rover Discovery, you need to go and open the glove box located on the passenger side, s
Where is the OBD port located on the 2016 Land Rover Discovery?
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Finding the OBD port in your Land Rover Discovery fourth series (year 2016) is really simple, and thanks to the following guide, it will literally ta Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |