Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : Range Rover Sport exterior mirror replacement

Land Rover Range Rover - Video tutorial

Model: Land Rover Range Rover MK 3, L322 - Years 2002-2012
Part: Outside rearview mirror
Operation: Range Rover Sport exterior mirror replacement

How to disassemble the rearview mirror of the car? Let's see how to remove the mirror of the Range Rover Sport. We pry between the perimeter of the mirror frame and the mirror glass of the same. We pry until the plastics come off the mirror (we disconnect the power cable). We unscrew the screws with a screwdriver to disconnect the mirror cover if we want to replace it. We replace the damaged part with the new one. We adjust the mirror once it is replaced with the old one. We use pieces of equal size to replace the damaged mirror.


Posted on 16 January 2024 by ScegliAuto



How to remove the exterior mirror mirror of a Range Rover Sport
Land Rover Range Rover (2002-2012 / MK 3, L322) Let's see how to remove the exterior mirror mirror of a Range Rover Sport. With a lever with a plastic (rubber) coating, we go to pry between the per
How to remove Range Rover rearview mirror
Land Rover Range Rover (2002-2012 / MK 3, L322) Let's see the exterior mirror disassembly of a Range Rover. We pry between the perimeter of the mirror frame and the mirror glass of the same. We pry
How to set the time on a Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) Before we can begin, we will have to go and sit in the driver's seat of our Range Rover Sport. Let's start by activating the on-board computer by pre

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos