Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate Handle on the Land Rover Freelander 1

Model: Land Rover Freelander Freelander 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Trunk lock

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the tailgate handle on the first series Land Rover Freelander, following the instructions below. First, open the tailgate and remove the inner panel; to do this, unscrew all the fixing screws located on the sides, as shown in the video.

Once removed, unscrew the handle screws using a socket wrench with an extension; then remove the handle from the outside by disconnecting the electrical connectors. Apply the reverse procedure for reassembly!


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Remove the Tailgate Handle on a Land Rover Freelander 2
How to Remove the Tailgate Handle on a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) In this video, learn how to remove the aluminium-coloured handle (located above the number plate) of the tailgate on a Land Rover Freelander 2. To be…
How to Replace the Boot Lock on the Land Rover Freelander
How to Replace the Boot Lock on the Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) These brief and simple steps will allow us to dismantle and replace the boot lock on the Land Rover Freelander. First, open the rear boot lid and sta…
How to Open a Stuck Tailgate on a Land Rover Freelander I
How to Open a Stuck Tailgate on a Land Rover Freelander I
Land Rover Freelander (1997-2006 / Freelander 1) This video shows the DIY repair of the tailgate release spring on the Land Rover Freelander I, produced from 1997 to 2006. For this model, no workaro…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos