Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Land Rover Freelander?

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Warning light – error code

Resetting the service light on a Land Rover Freelander 2 is very simple; let's see how to do it in the attached video tutorial. This procedure should only be performed after completing the maintenance work specified in the manual. Without using any pedals, press and hold the button located below the speedometer while simultaneously pressing the Start/Stop button; the "service" message will start flashing. At this point, continue to hold the same button until the message stops flashing, and by pressing it again, you can access the service submenu. Navigate to the "d1 St" option, hold the button, and confirm the reset. Repeat for the "date" option as well.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Land Rover Freelander
How to Reset the Service Light on the Land Rover Freelander
Land Rover Freelander (2006-2016 / Freelander 2) By following these brief steps, you will see how to reset the service light for the routine maintenance oil change on the Land Rover Freelander. Firs…
How to reset the service on the Land Rover Freelander?
How to reset the service on the Land Rover Freelander?
Land Rover Freelander (2006-2016 / Freelander 2) In this video, see how to reset the service on the Land Rover Freelander. This simple operation should only be performed after completing all schedul…
How to Reset the Service Light on the Land Rover Freelander 2?
How to Reset the Service Light on the Land Rover Freelander 2?
Land Rover Freelander (2006-2016 / Freelander 2) To reset the service light on the Land Rover Freelander 2, press and hold the button located on the right side of the instrument cluster, just below …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos