Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on a Land Rover Range Rover Sport?

Model: Land Rover Range Rover L322, MK 3 - Years 2002-2012
Part: Key

To replace the key fob battery on a Land Rover Range Rover Sport, lift the key by pressing the designated button. Next, unscrew the small screw located inside its housing; once removed, this will allow you to open the key fob. Inside, you will find the battery immediately above the chip: remove it and replace it with a new part. After replacement, insert the chip back into the key fob and close it using the fastening screw.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on a Range Rover Sport?
How to Replace the Key Battery on a Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) If the battery in the Smart Key of your Land Rover Range Rover Sport is dead, follow the attached video guide for step-by-step instructions on how to…
Replacing the Key Fob Battery for Land Rover Range Rover
Replacing the Key Fob Battery for Land Rover Range Rover
Land Rover Range Rover (2002-2012 / L322, MK 3) In this video, you will see how to disassemble and replace the battery of the key fob for a Land Rover Range Rover, as well as the Sport model, in si…
How to Replace the Key Fob Battery for the Range Rover Sport?
How to Replace the Key Fob Battery for the Range Rover Sport?
Land Rover Range Rover (2002-2012 / L322, MK 3) To replace the battery in the Land Rover Range Rover Sport key fob, you need a small flathead screwdriver and a replacement battery, model CR2032. Fi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos