Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Evoque
  6. : Battery replacement on Land Rover key

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Key
Operation: Battery replacement on Land Rover key

Move the silver side part so that it comes out of its seat and then remove it. You will then have access to the manual key that you can extract. Use the key itself or a small flat screwdriver to pry into the central space of the key case and divide it into two centerlines. VoilÃ! At this point you will find in front of your eyes the CR2025 battery that you can extract and insert the new one you have purchased (it is easily found in a hardware store or in a large supermarket). Reassemble everything by proceeding backwards: join the two center lines, insert the manual key and finally the side cover.


Posted on 30 March 2024 by ScegliAuto



Land Rover Range Rover Evoque key battery replacement
Land Rover Evoque (2011-2018 / MK 1, L538) In this video we will see how to remove and replace the remote control key battery of a Land Rover Range Rover Sport, but also on the normal Range Ro
How to replace the remote control battery of the Land Rover Evoque?
Land Rover Evoque (2018-2024 / MK 2, L551) In this tutorial we can see how to replace the Land Rover Evoque remote control battery, a very simple and fast operation. To do this we will only ne
How to replace the battery of the Land Rover Evoque remote control?
Land Rover Evoque (2011-2018 / MK 1, L538) In this tutorial, we can see how to replace the battery of the Land Rover Evoque remote control, an extremely simple and quick operation. To do this,

Other guides that may interest you

    Frequently Asked Questions

    • Evoque 2011-2018 - Why doesn't my Land Rover Evoque remote control work? Read Answer
    • Evoque 2011-2018 - Why does the Range Rover Evoque key not work? Read Answer
    • Evoque 2011-2018 - How much does a Range Rover Evoque remote control battery cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos