Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Start Block Due to Low AdBlue on the Land Rover Evoque

Model: Land Rover Evoque MK 2, L551 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: AdBlue warning light

See other generations:
Video tutorial

If you need to unlock the warning for low AdBlue and cannot start the vehicle, you must use a diagnostic system connected to the car's port. To do this, enter diagnostic mode and select "features", then scroll to "select new module", wait for the update and vehicle data reading.

Next, go back to "features" and select "engine group", then choose "reset exhaust gas recovery system", and finally click the "ok" button three times to complete the data reading and reset the error.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to top up the AdBlue on the Land Rover Evoque
How to top up the AdBlue on the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Shortly, we will see the instructions that will allow us to top up the AdBlue fluid on the Land Rover Evoque. First, we open the hood of the car and …
Reset the AdBlue Warning Light on the Land Rover Evoque MK2
Reset the AdBlue Warning Light on the Land Rover Evoque MK2
Land Rover Evoque (2018-2026 / MK 2, L551) In this short video, learn how to reset the AdBlue fluid warning light for the emissions system on the Land Rover Evoque second generation. Before pe…
How to Reset the AdBlue Warning Light on a Land Rover Evoque?
How to Reset the AdBlue Warning Light on a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) If the AdBlue warning light is on in the instrument cluster of your Land Rover Evoque, it means that the fluid in the emissions system has reached th…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos